How to Build a Bed Frame

How to

Finding a capability bed frame can be quite troublesome and expensive. For those who are handy with tools, spending the money on Supplies can save you a great deal of money and help ensure you have a capability end result. Succeed these steps to learn how to build a bed frame.

What You Will Need

Post Beds

For a straightforward box bed frame, you will need:

How ot How to Build a Bed Frame

• Plenty of a High capability Wood: Having extra on hand is all the time a good idea in case there are mistakes with cuts or measureMents.
• Saw
• Measuring Tape
• Pencil
• Wood Glue
• Wood Screws
• Veneered Plywood

Step One: quantum the Size of Your Bed

Use the measuring tape to quantum all sides of your bed. Mark these measureMents down on a piece of paper if you will be going outside of the bedroom to cut the pieces of wood for the frame.

Step Two: Cut the Pieces of Wood

Measure the pieces of wood agreeing to the measureMents from your bed. Use the pencil to mark the estimation and the saw to cut the wood accordingly.

Step Three: Glue the Pieces of Wood Together Using a High capability Wood Glue

Use a high capability wood glue, such as Gorilla Glue to glue the pieces of the bed frame together as agreeing to your measureMents.

Step Four: Add Screws to support the Wooden Frame

Once the glue has dried agreeing to the directions on the bottle, you will want to add wood screws to properly get all the pieces of the bed together.

Step Five: Attach support Beams

If you are construction a bed frame for a bed larger than a full size bed, you will want to add support beams to the frame. The amount of support beams you add is up to you, but there should be at least one in the town of the frame to help support the weight and size of the mattress. quantum and cut the beams as agreeing to Step Two. The support beams can be attached with screws only, rather than gluing first and adding the screws later.

Step Six: Attach a Sheet of Veneered Plywood to the Top of the Frame

To quit the frame, attach a piece of veneered plywood to the top of the frame. This can be attached with wood screws, rather than glue.

If you're feeling bold, you can also use this frame to build a four post bed frame. You will need four square posts, cut to the the height of your choice. The square posts should be slightly larger than the interior of your mattress. Attach the posts to each corner of the bed frame. Attach two bed rail hangers to the posts where the bed rails will be. Cut grooves in the supports you would use as slats. Attach the veneer piece of plywood. Now you have a nice four post bed frame for your bed to sit on.

How to How to Build a Bed Frame

Friends Link : Buy Shopping Discount Malibu Pilates Chair Bape G Shock Husqvarna Snow Blowers